Skip to content
Cousinproud Concrete
New driveway planning for Aurora homeowners

Residential Concrete Driveways in Aurora

Request an estimate for your driveway

Thinking about a new concrete driveway in Aurora? Check before you pour. A solid plan saves money and stress later. Cousinproud Concrete is a referral service. We connect homeowners with independent providers in our network, and the providers do the work. This page covers questions to ask, jobs you can handle yourself, and what the schedule usually looks like. Use it to feel ready, then request an estimate when you want to talk with a local provider.

Questions to Ask Before You Hire

Plan the slab before a truck shows up. Write your questions down and ask every provider the same ones. That makes quotes easy to compare side by side.

  • How thick will the slab be, and what goes under it? Many home driveways use about four inches of concrete over compacted gravel. Heavier vehicles may call for more.
  • Where will the control joints go? Joints give cracks a planned place to show up. Ask how far apart they will be.
  • What mix suits cold winters? Air-entrained concrete handles freeze and thaw better. That matters where frost runs deep.
  • How will water drain? The surface should slope away from the house and the garage door.
  • Who handles permits and utility marking? Some towns require a permit for flatwork. Ask who sorts it out.
  • What does the written quote include? Look for demolition, haul-away, base, forms, finishing, sealing and cleanup.

Typical new driveways in the U.S. often land somewhere around $6 to $15 per square foot, but the range moves with the job. Get the number in writing.

Request an Estimate

Why a Nearby Provider Helps

Aurora homeowners deal with cold winters, hot humid summers, hard thunderstorms, hail and spring flooding. Concrete feels all of it. A provider who works in the region knows how the soil heaves after a deep freeze and how wet springs soften a poor base.

Housing matters too. Ranch homes, bungalows and older frame houses often sit on full basements with sump pumps. A nearby provider can walk your lot and see where the discharge line runs and where water pools. A short drive also makes it easier to book a visit, ask follow-up questions and come back to check the work.

Request a callback to check provider availability for your area.

Request an Estimate

When DIY Is Fine and When to Call

Know where DIY ends. A weekend can cover a lot of the prep and the care.

Good jobs for you:

  • Measure the drive and sketch the shape you want.
  • Probe the soil with a rod to feel for soft spots.
  • Mark the edges with paint or string.
  • Clear sod, rocks and roots from the path.
  • Rinse and sweep the old surface so a provider can judge it.
  • Seal a new slab after it has cured, if the provider says it is ready.

Time to stop and talk to a provider:

  • You want to pour a full driveway. Mixing, placing and finishing is hard to fix once it sets.
  • The old slab has wide cracks, sunken corners or uneven panels. Small hairline cracks can take filler, but that kind of concrete driveway repair has limits. When damage is widespread, replacement may make more sense.
  • Water seeps toward the basement wall or the slab tilts toward the house. Ask foundation repair experts to look at the structure first, then plan the new concrete.
  • You are not sure where the sump pump line runs.

Request an Estimate

What a Typical Job Timeline Looks Like

Every job differs, but the steps are usually similar.

  • Estimate visit. The provider measures, checks the slope and talks through your goals.
  • Written quote. Review the scope, materials and payment terms. Ask questions before you sign.
  • Scheduling. Weather matters. Rain, frost and extreme heat can push a pour date.
  • Demolition and prep. Old concrete comes out, the base gets graded and compacted, and forms go in.
  • Pour and finish. The crew places the concrete, smooths it, cuts joints and adds a surface texture.
  • Curing. Light foot traffic is often fine after a day or two. Vehicles usually wait about a week. Concrete keeps gaining strength for around a month.
  • Sealing and care. Once the slab has cured, sealing helps it shed water and salt.

Keep pets, kids and cars off the surface until the provider says it is safe.

Ready to plan? Request a callback to talk through your project, or use the request form.

Request an Estimate

Take the Next Step in Aurora

Cousinproud Concrete does not pour concrete. Providers in our network do. Our job is to point you toward a local provider who handles new concrete flatwork. Bring your measurements, your questions and your photos, and you will have a much better first conversation.

Request an Estimate

Our Services in Aurora

Why Aurora Chooses Cousinproud Concrete

Check before you pour, every time

A short walk around your yard, a measuring tape and a list of questions can save you from costly surprises once the forms are set.

Independent local providers

Providers in our network are independent. They quote and do the work, and you review the written terms before you agree.

Built for regional weather

Deep frost, hail, heavy storms and spring water all test a slab. Ask each provider how the plan handles them.

Clear next steps for you

Request an estimate online whenever you are ready. There is no obligation, and you choose whether to move forward.

Ready to Plan Your Slab?

Planning a new driveway or patio? Send a request for an estimate and a local provider in our network can follow up with you.

No obligation
Contact Us

Get in touch

Planning a new driveway or patio? Send a request for an estimate and a local provider in our network can follow up with you.

No obligation
Request a callback